Press the left trim at waist height to release the concealed magnetic latch.
Tap a book to take it out. Tap or drag a cabinet panel to slide it. Drag the background to rotate.
Hidden Bookcase Door
4.84 reviewsWoodworking plan by WoodWorkerTed Digital download
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.
Build an outward-swinging red oak bookcase that conceals a full-size doorway.
$10.00
What’s included+
41-page printable PDFCut list, drawings and instructions
10-step 3D guideEvery part and fastener, step by step
Tools you’ll need+
- Guided circular saw or table saw
- Pocket-hole jig and drill/driver
- Forstner bit, countersink and sharp chisel
- Brad and pin nailers
- Level, combination square and clamps
Delivery & Etsy access+
Your printable PDF and the 3D assembly guide live in your workshop library. Bought on Etsy? Log in here and enter the order number from your Etsy receipt to add the plan.
Our guide accuracy promise+
Found an error or inconsistency in your DIY woodworking guide? Please contact us through Etsy Messages with a brief description of the issue. If the guide contains an error—such as conflicting measurements, an incorrect cut list, or inconsistent instructions—we’ll issue a full refund for the affected guide and send you a corrected version at no additional cost. As an extra thank-you for helping us improve, we’ll also send you a discount code for our woodworking bundles.
Plan details
- Category
- Built-ins & Workshop
- Skill level
- Intermediate to advanced
- Build time
- Two to three weekends
- Assembly steps
- 10
- Printable PDF
- 41 pages
- Fits
- 32″ × 80″ doorway
- Format
- PDF download + 3D web guide
Description
Build an outward-swinging red oak bookcase that conceals a doorway. Three open compartments sit above a cabinet with sliding panels. Follow each joint from the printable plan in the interactive 3D guide.
Three open compartments sit above a cabinet with two sliding doors. Four butt hinges, hinge screws, sliding tracks and a magnetic push latch complete the build. Materials and hardware are purchased separately.

WoodWorkerTed
Each plan is drawn from a full 3D model, so the cut list, the drawings and the assembly order come from the same measurements.
- da***@gmail.com
Built this for my office closet over three weekends. The 3D guide was the difference maker for the hinge side. I could rotate the casing and see exactly where each pin goes. The door swings clean and nobody guesses there is a room behind it.
- ka***@outlook.com
The plan is thorough. 41 pages and the cut list matched my lumber order to the board. The sliding cabinet panels were my favourite part to build.
- mj***@yahoo.com
Great plan overall. I had to shim my rough opening because my framing was out of square, which the plan does warn you about. Took me longer than two weekends but I am a slow builder.
- to***@gmail.com
Watched the 3D preview about twenty times before buying. Started the casework yesterday and the step order makes a lot of sense so far.
Questions about this plan
What do I get with the Hidden Bookcase Door plan?+
A 41-page printable PDF with the cut list, drawings and instructions, plus the 10-step 3D assembly guide in your online workshop library.
Is this a physical product?+
No. This is a digital woodworking plan. Lumber, hardware and tools are bought separately.
How hard is it to build?+
Skill level: Intermediate to advanced. Typical build time: two to three weekends.
What size is it?+
The plan is sized for a standard 32″ × 80″ doorway.
I bought the plan on Etsy. How do I open the 3D guide?+
Log in with your email address, then enter the order number from your Etsy receipt on the Access page. The plan is added to your library.
What if I find a mistake in the plan?+
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.




