
Compact Bolted-Arm Hammock Stand
4.52 reviewsWoodworking plan by WoodWorkerTed Digital download
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.
A freestanding hammock stand about 12 ft 9 in (3.89 m) long and 4 ft 1 in (1.24 m) tall: a 4x6 base on two cross feet, two 4x4 arms leaning out 30 deg, each held by a pair of 2x12 gussets and a pair of 2x4 braces.
$6.00
What’s included+
20-page printable PDFCut list, drawings and instructions
5-step 3D guideEvery part and fastener, step by step
Tools you’ll need+
- Miter saw or circular saw with a speed square (30 deg foot cuts)
- Drill/driver with a 1/4 in hex bit for the connector screws
- 9/16" (14.3 mm) and 13/16" (20.6 mm) auger bits at least 12" (30 cm) long: use the imperial bits; 1 1/2" (38 mm) Forstner bit
- Depth stop or tape flag for the Forstner bit; a square scrap guide block
- Socket set or wrenches: 3/4 in and 1 1/8 in
- Speed square, bevel gauge, tape measure, 4 ft (1.2 m) level
- Clamps (at least 4, two of them 18 in / 45 cm or longer), and a helper
- Sander, 80 and 120 grit; stain brush, lint-free rags and a metal can with a lid
Delivery & Etsy access+
Your printable PDF and the 3D assembly guide live in your workshop library. Bought on Etsy? Log in here and enter the order number from your Etsy receipt to add the plan.
Our guide accuracy promise+
Found an error or inconsistency in your DIY woodworking guide? Please contact us through Etsy Messages with a brief description of the issue. If the guide contains an error—such as conflicting measurements, an incorrect cut list, or inconsistent instructions—we’ll issue a full refund for the affected guide and send you a corrected version at no additional cost. As an extra thank-you for helping us improve, we’ll also send you a discount code for our woodworking bundles.
Plan details
- Category
- Outdoor & Garden
- Skill level
- Intermediate
- Build time
- Two days' work, plus drying
- Assembly steps
- 5
- Printable PDF
- 20 pages
- Format
- PDF download + 3D web guide
Description
A freestanding hammock stand about 12 ft 9 in (3.89 m) long and 4 ft 1 in (1.24 m) tall: a 4x6 base on two cross feet, two 4x4 arms leaning out 30 deg, each held by a pair of 2x12 gussets and a pair of 2x4 braces. Every structural joint is bolted, so it comes apart for winter. For spreader-bar hammocks 9 to 11 ft (2.7 to 3.4 m) long overall, hung on chains, with three eye-bolt pairs for different hammock lengths; each pair uses its own chain length from the fit table.

WoodWorkerTed
Each plan is drawn from a full 3D model, so the cut list, the drawings and the assembly order come from the same measurements.
- ja***@gmail.com
Sturdy as can be. I weigh 220 lb and it does not budge. Bolting everything means it comes apart for winter just like the plan promises.
- le***@outlook.com
The angle cuts on the arms took a couple of tries, but the drawings are accurate. Looks great on the patio.
Questions about this plan
What do I get with the Compact Bolted-Arm Hammock Stand plan?+
A 20-page printable PDF with the cut list, drawings and instructions, plus the 5-step 3D assembly guide in your online workshop library.
Is this a physical product?+
No. This is a digital woodworking plan. Lumber, hardware and tools are bought separately.
How hard is it to build?+
Skill level: Intermediate. Typical build time: two days' work, plus drying.
I bought the plan on Etsy. How do I open the 3D guide?+
Log in with your email address, then enter the order number from your Etsy receipt on the Access page. The plan is added to your library.
What if I find a mistake in the plan?+
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.


