
Lobby Window Flag Collection Box
52 reviewsWoodworking plan by WoodWorkerTed Digital download
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.
An indoor collection box for worn flags, for a lobby counter or table.
$4.00
What’s included+
24-page printable PDFCut list, drawings and instructions
6-step 3D guideEvery part and fastener, step by step
Tools you’ll need+
- Miter saw; table saw or circular saw with a rip guide
- Drill/driver, bits 1/16" to 3/4" (spade or Forstner for the lock), 3/8" counterbore bit, countersink
- Long #1 screwdriver or a 12" bit extension (window screws); stubby screwdriver (catch block)
- Router with a 1/8 in round-over bit, or a sanding block (round the edges that show)
- Flush-cut saw or chisel (plugs); 4 bar clamps, 2 long clamps for the top
- Tape measure, square; sander 120-220 grit; brushes; plastic scoring knife for the acrylic
Delivery & Etsy access+
Your printable PDF and the 3D assembly guide live in your workshop library. Bought on Etsy? Log in here and enter the order number from your Etsy receipt to add the plan.
Our guide accuracy promise+
Found an error or inconsistency in your DIY woodworking guide? Please contact us through Etsy Messages with a brief description of the issue. If the guide contains an error—such as conflicting measurements, an incorrect cut list, or inconsistent instructions—we’ll issue a full refund for the affected guide and send you a corrected version at no additional cost. As an extra thank-you for helping us improve, we’ll also send you a discount code for our woodworking bundles.
Plan details
- Category
- Gifts & Décor
- Skill level
- Confident beginner
- Build time
- One weekend plus finishing time
- Assembly steps
- 6
- Printable PDF
- 24 pages
- Format
- PDF download + 3D web guide
Description
An indoor collection box for worn flags, for a lobby counter or table. Folded flags go in through a slot in the oak top and stay in view behind a clear window; a locking rear door lets you empty it.

WoodWorkerTed
Each plan is drawn from a full 3D model, so the cut list, the drawings and the assembly order come from the same measurements.
- po***@gmail.com
Built two of these for our American Legion post. The window lets people see the flags being collected and the locking door is secure. Very respectful design.
- st***@yahoo.com
Straightforward plan with nice oak details. The slot size is just right for folded flags.
Questions about this plan
What do I get with the Lobby Window Flag Collection Box plan?+
A 24-page printable PDF with the cut list, drawings and instructions, plus the 6-step 3D assembly guide in your online workshop library.
Is this a physical product?+
No. This is a digital woodworking plan. Lumber, hardware and tools are bought separately.
How hard is it to build?+
Skill level: Confident beginner. Typical build time: one weekend plus finishing time.
I bought the plan on Etsy. How do I open the 3D guide?+
Log in with your email address, then enter the order number from your Etsy receipt on the Access page. The plan is added to your library.
What if I find a mistake in the plan?+
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.


