Cubby Shoe Bench with Boot Shelf

4.73 reviews

Woodworking plan by WoodWorkerTed Digital download

Accuracy promise

Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.

A compact entryway shoe bench in 3/4 in plywood: a solid oak seat, three open cubbies for storage baskets and an open boot shelf below.

$5.00

What’s included
  • 25-page printable PDF

    Cut list, drawings and instructions

  • 5-step 3D guide

    Every part and fastener, step by step

Tools you’ll need
  • Circular saw with a straightedge guide, or a table saw; miter saw for the boards
  • Drill/driver, 1/8" pilot bit with countersink, 1/4" bit, awl and tape for a depth flag
  • Stubby screwdriver or right-angle drill attachment (cubbies are 6 1/2 in tall)
  • Brad nailer or hammer; household iron and trim knife for the banding
  • 4 clamps 18 in or longer and two straight cauls (seat glue-up)
  • Tape measure, combination and carpenter's squares; sander, 120/180 grit
  • Brush, small foam roller, rags and a lidded metal can for oily rags
Delivery & Etsy access

Your printable PDF and the 3D assembly guide live in your workshop library. Bought on Etsy? Log in here and enter the order number from your Etsy receipt to add the plan.

Our guide accuracy promise

Found an error or inconsistency in your DIY woodworking guide? Please contact us through Etsy Messages with a brief description of the issue. If the guide contains an error—such as conflicting measurements, an incorrect cut list, or inconsistent instructions—we’ll issue a full refund for the affected guide and send you a corrected version at no additional cost. As an extra thank-you for helping us improve, we’ll also send you a discount code for our woodworking bundles.

Cubby Shoe Bench with Boot Shelf$5.00
Buy on Etsy

Plan details

Category
Indoor Furniture
Skill level
Confident beginner
Build time
One weekend plus finish drying
Assembly steps
5
Printable PDF
25 pages
Format
PDF download + 3D web guide

Description

A compact entryway shoe bench in 3/4 in plywood: a solid oak seat, three open cubbies for storage baskets and an open boot shelf below. Edge-banded fronts, a recessed kick and a plywood back keep it neat and square.

About the designer

WoodWorkerTed

Each plan is drawn from a full 3D model, so the cut list, the drawings and the assembly order come from the same measurements.

All plans
  • je***@gmail.com

    Our entryway is finally under control. Edge banding was new to me and the plan walked me through it. Finished in a weekend.

  • ma***@outlook.com

    Great weekend build. The solid oak seat looks really nice against the painted plywood.

  • so***@yahoo.com

    Easy to follow. I would have liked one more drawing of the kick recess, but the 3D guide covered it.

Questions about this plan

What do I get with the Cubby Shoe Bench with Boot Shelf plan?

A 25-page printable PDF with the cut list, drawings and instructions, plus the 5-step 3D assembly guide in your online workshop library.

Is this a physical product?

No. This is a digital woodworking plan. Lumber, hardware and tools are bought separately.

How hard is it to build?

Skill level: Confident beginner. Typical build time: one weekend plus finish drying.

I bought the plan on Etsy. How do I open the 3D guide?

Log in with your email address, then enter the order number from your Etsy receipt on the Access page. The plan is added to your library.

What if I find a mistake in the plan?

Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.

More answers in our FAQ

Related plans