
Fold-Down Wall Workbench
4.73 reviewsWoodworking plan by WoodWorkerTed Digital download
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.
A compact fold-down workbench station for a stud wall: a 40 x 24 in worktop (two layers of plywood with a hardwood edge band) on a pair of Rockler Rock-Steady folding wall brackets, and above it a 40 x 30 in French cleat tool wall with four holders and a shallow top shelf.
$6.00
What’s included+
33-page printable PDFCut list, drawings and instructions
9-step 3D guideEvery part and fastener, step by step
Tools you’ll need+
- Circular saw with a clamped straightedge guide and a 45 degree shoe setting (cleat bevels); miter saw or handsaw; jigsaw (notches, gussets)
- Drill/driver; bits 1/8" with a countersink, 9/64", 7/32" and a 5/8" spade bit; 1/2" socket with a ratchet; brad nailer (18 gauge) or a hammer and 1 1/4" brads
- Block plane or sanding block; 1 1/4" spade bit (hammer block); a 1/8" bit at least 3 1/2" long (a 6" bit) to pilot the #10 stud screws; stud finder, 4 ft level, tape measure, square, pencil; 4 clamps; a helper to hold the worktop
Delivery & Etsy access+
Your printable PDF and the 3D assembly guide live in your workshop library. Bought on Etsy? Log in here and enter the order number from your Etsy receipt to add the plan.
Our guide accuracy promise+
Found an error or inconsistency in your DIY woodworking guide? Please contact us through Etsy Messages with a brief description of the issue. If the guide contains an error—such as conflicting measurements, an incorrect cut list, or inconsistent instructions—we’ll issue a full refund for the affected guide and send you a corrected version at no additional cost. As an extra thank-you for helping us improve, we’ll also send you a discount code for our woodworking bundles.
Plan details
- Category
- Built-ins & Workshop
- Skill level
- Confident beginner
- Build time
- One weekend
- Assembly steps
- 9
- Printable PDF
- 33 pages
- Format
- PDF download + 3D web guide
Description
A compact fold-down workbench station for a stud wall: a 40 x 24 in worktop (two layers of plywood with a hardwood edge band) on a pair of Rockler Rock-Steady folding wall brackets, and above it a 40 x 30 in French cleat tool wall with four holders and a shallow top shelf. Folded down, the worktop hangs about 3 in (8 cm) off the wall.

WoodWorkerTed
Each plan is drawn from a full 3D model, so the cut list, the drawings and the assembly order come from the same measurements.
- ga***@gmail.com
Exactly what my one-car garage needed. The worktop folds flat and the French cleat wall keeps all my drivers in reach. One Saturday from start to finish.
- ni***@outlook.com
First woodworking project ever. The plan explained how to find and use the studs, which I really appreciated. It holds my 40 lb miter saw without flexing.
- os***@icloud.com
Good plan. The brackets are pricey, but the plan is clear about why you want the good ones.
Questions about this plan
What do I get with the Fold-Down Wall Workbench plan?+
A 33-page printable PDF with the cut list, drawings and instructions, plus the 9-step 3D assembly guide in your online workshop library.
Is this a physical product?+
No. This is a digital woodworking plan. Lumber, hardware and tools are bought separately.
How hard is it to build?+
Skill level: Confident beginner. Typical build time: one weekend.
I bought the plan on Etsy. How do I open the 3D guide?+
Log in with your email address, then enter the order number from your Etsy receipt on the Access page. The plan is added to your library.
What if I find a mistake in the plan?+
Found a conflicting measurement or an incorrect cut list? We refund the guide in full and send you a corrected version.


